 |
|
 |
 |
9000 | 9200 | 9760 Reference Engravers | Straight Knives | Flooring | Arbor Planers |
|
|
 |
quick change Procedure |
|||
|
||||
Step 1:Back out the safety set screws. 
Step 2:Push down on the spring loaded gib and remove the knife radially. 
Step 3:The turned or new knife is inserted radially. 
Step 4:
By pushing again on the spring loaded gib, the knife is precisely seated on the self-locating ridge. Tighten down set screw until snug, then back off a half turn. |
||||
1968 High Definition Dr. Connelly Springs, NC 28612 (828) 397-2467 -- Fax (828) 397-4008 sales@terminus-stl.com |
||||
 |
| Home | Cutterheads | Knives/Inserts | Machine Reference | Inventory Clearance | | Quick Change | Trade Shows | Terms | About Us | Site Map | |
©2007 Terminus All Rights Reserved |